For years in Grenada, as across the Caribbean, a young person who was good with their hands but did not shine in academic exams could leave school with skills and no certificate to prove them. Employers had to take workers on trust, and qualified tradespeople could not easily show their competence to an employer in another island. Competency-based vocational qualifications, the Caribbean Vocational Qualification (CVQ) and Grenada's National Vocational Qualification (NVQ), were introduced to change that.
This page explains what these qualifications are, how the levels work, who awards them in Grenada, and how a student, worker or employer can use them. It is aimed at school leavers and parents weighing up vocational routes, adults with years of experience and no paper qualification, and employers trying to make sense of applicants' certificates.
What makes a vocational qualification "competency-based"
Traditional exams test what a candidate knows on a particular day. Competency-based qualifications test whether a person can actually do a job to a recognised standard. Each occupation, from electrical installation and plumbing to food preparation, cosmetology, agriculture or office administration, is broken down into occupational standards: units describing specific tasks and the standard required, written with input from employers and industry.
Candidates are assessed against those units, mostly through practical demonstration, observed work, projects and a portfolio of evidence, supported by questioning on underpinning knowledge. There is no pass mark in the usual sense: a candidate is judged either competent or not yet competent in each unit. Units can be built up over time, and a full qualification is awarded once all required units are achieved.
This approach suits learners who perform better through doing than through written exams, and it reassures employers that a certificate means the holder has demonstrated the skill, not just read about it.
The five levels
Level 1: entry level. Routine tasks under supervision. Suitable for new entrants, school leavers and those starting out in a trade.
Level 2: skilled worker. A broader range of tasks carried out with some independence. This is the level many employers look for in a competent tradesperson or front-line worker.
Level 3: technician or supervisor. Complex tasks, responsibility for others' work, and the ability to solve non-routine problems. Often associated with supervisory and senior technical roles.
Level 4: advanced technical or managerial. Specialised technical knowledge and management of processes and people.
Level 5: professional or senior management. The highest level, involving strategic responsibility and advanced expertise. Relatively few qualifications are offered at this level.
In practice. Most training in Grenada, in schools and skills programmes, is at Levels 1 and 2, with Level 3 offered in a narrower range of occupations, often at college. Levels describe the complexity and responsibility of the work, not the length of a course, so a Level 2 in one trade may take longer than a Level 2 in another. When comparing courses, ask which level and which occupational standard they lead to, not just how many months they run.
Who awards what in Grenada
In Grenada, the Grenada National Training Agency (GNTA) is the national body responsible for coordinating technical and vocational education and training (TVET), maintaining occupational standards, approving training and assessment centres, and awarding the National Vocational Qualification. Through regional arrangements with other national training agencies, coordinated by the Caribbean Association of National Training Agencies (CANTA), Grenada can also award the Caribbean Vocational Qualification.
The CVQ is intended to be portable across the Caribbean Community, meaning a qualification gained in Grenada should be recognised in other member states, supporting the free movement of skilled workers under CARICOM arrangements. The Caribbean Examinations Council (CXC) also offers CVQs within secondary schools, so some students leave school with CSEC subjects and one or more CVQ units or full qualifications.
Training for these qualifications takes place at approved centres, which can include the T.A. Marryshow Community College, secondary schools with technical programmes, government skills programmes, non-governmental training organisations and some employers. Before enrolling, confirm with the provider and the GNTA that the course is approved and leads to a recognised qualification at the level you expect.
Using the qualification in work and further study
For job seekers, a CVQ or NVQ is evidence that can be shown to employers and, in principle, used across the region. For employers, it simplifies recruitment and helps in planning staff development: a Level 2 worker can be supported towards Level 3, with clear standards for what that means. Some employers and public bodies are increasingly asking for certified competence in trades related to safety, such as electrical work.
Vocational qualifications can also connect with further study. Holders of higher-level CVQs may be able to use them towards entry or credit at colleges, depending on the institution's rules. A student who leaves school with a CVQ Level 2 can continue to Level 3 at college, combine it with CSEC subjects to meet entry requirements for associate degrees, or move into an apprenticeship.
Remember that recognition decisions are made by each employer, institution or country. A CVQ is designed to be portable, but if you plan to work in a regulated trade elsewhere, check the licensing rules in that place too.
Getting certified with experience but no certificate
Experienced workers can often have existing skills assessed rather than starting from scratch, through what is commonly called prior learning assessment. The general process looks like this:
- Contact the GNTA or an approved assessment centre and explain your trade, how long you have worked in it and the kind of jobs you do.
- Obtain the occupational standard for your trade and level, and compare it honestly with what you already do.
- Gather evidence: references from employers or clients, photographs of completed work with dates and locations, records of jobs, and any certificates from short courses or safety training.
- Attend gap training for any units you have not covered in your work; theory on regulations, safety and calculations is a common gap for people who learned purely by doing.
- Complete practical assessment with an approved assessor, who observes you working and asks questions.
- Receive your qualification once all units are judged competent and verified.
Why the route suits experienced workers
Grenada has many skilled people who learned on the job: masons who have built houses for twenty years, mechanics who trained in a family garage, cooks who rose through hotel kitchens. Prior learning assessment recognises that experience without forcing them back into a classroom for skills they already have. The paperwork can feel unfamiliar, and gathering evidence takes effort, but the result is a certificate that opens doors to larger employers, contracts that require certified workers, and opportunities elsewhere in the region. Ask the GNTA about any fees and current arrangements before starting.
Employers can use the same process to certify an existing workforce. A contractor, hotel or workshop that has its experienced staff assessed gains a documented skills profile, can show clients and insurers that work is done by certified people, and can plan training for the gaps that assessment reveals.
Things to check before you enrol
A few checks prevent wasted time and money:
- Is the training centre approved, and does the course lead to a full CVQ or NVQ, or only certain units?
- What level is the qualification, and is that the level employers in your field expect?
- How much of the course is practical, and does the centre have the tools and workshops to deliver it?
- What does it cost, including materials, registration and assessment fees, and is any financial support available?
- How long does it take to complete, and can it be done part time alongside work?
- Is there a work placement or attachment, which is often the best route to a job?
- Who are the assessors, and are they approved for your occupational area?
- What happens if you are judged not yet competent in a unit: can you be reassessed, and at what cost?
- Will you receive a record of the units you complete, even if you do not finish the full qualification straight away?
Frequently asked questions
What is the difference between a CVQ and an NVQ in Grenada?
Both are competency-based qualifications built on occupational standards. The NVQ is Grenada's national qualification, awarded by the Grenada National Training Agency, while the CVQ is a regional qualification designed to be recognised across CARICOM. The approach and levels are similar.
Can students earn a CVQ while still in secondary school?
Yes. The Caribbean Examinations Council offers CVQs within secondary schools, so students can gain units or full qualifications alongside CSEC subjects. Ask the school which occupational areas it offers, as availability depends on staff and workshop facilities.
Is a CVQ recognised in other Caribbean countries?
The CVQ is designed to be portable across CARICOM member states and to support the free movement of skilled workers. Recognition is still decided by employers and, for regulated trades, licensing bodies, so check rules in the country where you plan to work.
How long does it take to get a CVQ Level 2?
It depends on the occupation, the provider and whether study is full or part time. Many programmes run from several months to around two years. Experienced workers going through prior learning assessment may complete faster by demonstrating existing skills.
Do employers in Grenada value vocational qualifications?
Increasingly, yes, especially in construction, electrical trades, hospitality and other fields where safety and service standards matter. A CVQ or NVQ gives employers evidence of competence, though practical experience and references remain very important in hiring decisions.